Product Categories
2026 © Copyright Jiangsu Mingyou Architectural Decoration Engineering Co., LTDAll rights reserved
PRODUCT INTRODUCTION
customized aluminium honeycomb board, with an annual output of 500,000 m2. Use Southwest Aluminum 3004, 5052 series of high-strength aluminum-magnesium-manganese alloy rust-proof aluminum plates, or Korean Xiangpu stainless steel plates, fireproof A-level STP vacuum insulation insulation boards, American DUPONP glue, American PPG 70% or more fluorocarbon coatings, French Noval Plug the protective film, which provides enough guarantee for good quality! It belongs to the National Ministry of Construction's energy-saving and land-saving building promotion and application technology project. At the same time, it is an invited drafting unit for the "National Standard for Metallic Surface Insulation Board", and has independent development intellectual property rights. It has been adopted by many domestic projects.
PRODUCT FEATURE
The exterior wall thermal insulation and decoration system of metal decorative thermal insulation board has the advantages of Class A fire protection, low heat transfer coefficient, good decorative effect, good flatness, durability and resistance to aging, light weight, safe and firm, convenient transportation and installation, and low cost of use. . At the same time, it solves the problems of cracking, bulging, falling off, complicated construction, and difficulty in renovation that occurred in the previous external thermal insulation system of rubber powder polystyrene particles and expanded polystyrene board thin plaster. And it solves the problems of high cost, complicated construction and easy deformation of other metal curtain walls such as aluminum veneer, aluminum honeycomb panel, aluminum composite panel, stainless steel panel and so on.
PRODUCTION TECHNOLOGY
COMPARISON BETWEEN THE NEW FIRE PROTECTION STANDARD GB8624-2006 AND THE OLD STANDARD GB8624-1997
Incombustible | Class A (homogeneous material) | A1 (old) |
Class A (composite materials) | A2 (old) | |
Flame retardant | Class B (new) | B1(old) |
Class C (new) | ||
Combustible | Class D (new) | B2(old) |
Class E (new) | ||
Flammable | Class F (new) | B3(old) |
COMPARISON OF THERMAL CONDUCTIVITY OF DIFFERENT INSULATION BOARDS
project | XPS | RW | PU | STP | EPS | EPSG | PVC |
Thermal Conductivity 【w（m.k）】 | ≤0.03 | ≤0.048 | ≤0.024 | ≤0.006 | ≤0.041 | ≤0.041 | ≤0.04 |
Fire prevention | Class B | Class A | Class B | Class A | Class B | A2～B1 | Class B |
BASIC STRUCTURE
INSTALLATION METHOD
SPECIFICATION
PRODUCT USAGE
Used for building exterior wall, curtain wall panel, old building renovation and renovation, indoor wall repair
FAQ
1.What is a Metal Facing Insulation Board?
Metal Facing Insulation Board, often known as the sandwich panel, is a three-layered construction or cladding material that consists of a low-density core (thermoplastic polythene) and a thin skin layer (Aluminum or Rubber) attached to either side.
2.What gauge/thickness does your material come in?
Both flat sheets and panels range in gauge/thickness from 0.6mm (0.024”) to 3.0mm (0.12”) aluminum. Material gauge/thickness required will vary depending on the panel type.
3.What size Metal Facing Insulation Boards do you offer?
Our Metal Facing Insulation Boards are formed from flat sheets sized 48” by up to 177”, with standard sheet size of 48” x 120”. We can fabricate large or small panels, depending on the application and needs of the design.
4.Where are your primary products used?
Our Metal Facing Insulation Boards are commonly used in architectural decoration field. For example, they can be used for decoration and protection of ceilings, pillars, sales counters, furniture, telephone booths, elevators, stores, and advertising boards, among many others.
5.What is the price of a Metal Facing Insulation Board?
The cost of the Metal Facing Insulation Board depends on several variables, including the material, size, texture, and quantity ordered.
6.What are the applications of the Metal Facing Insulation Board?
Metal Facing Insulation Board is a modern building material that is mostly used for external and internal architectural cladding or partitions, false ceilings, facade, signage, machine coverings, modular kitchens, container construction, and so on.
7.Can I customize a finish? How long does it take?
Yes! Custom samples require 3-5 weeks to produce. The number of revisions required will add to the overall lead time.
8.What are the material order minimums and lead times?
Our raw material lead times are considered from point of formal flat sheet order to delivery at the fabrication site. We have lead times for both Factory/Custom Orders and Inventory/Stock Orders below. Custom design and fabrication will add additional lead times to the below.
Inquire Now
